Turn Rate Adalah

Turn rate is the speed at which a unit can turn. When moving to a location, a unit first turns to face that location, then begins walking. Similarly, when targeting another unit with an attack or spell, a unit first turns until it is facing the target, and then continues with the action. A unit only starts moving, or only starts casting a spell on a targeted area or point when the target is within 11.5°[1] angle in front of the ordered unit. This can make kiting more difficult, as the hero has to spend time turning towards and away from the target with each attack.

Every unit has a base turn rate, which can be lowered by some abilities. The vast majority of heroes have a turn rate between 0.6 and 0.5, meaning it takes between 0.15 and 0.19 seconds for the hero to make a 180° turn.

There are currently no talents that improve turn rate.

Turn rate is expressed in radians per 0.03 seconds. A 180° turn is the same as $\backslash pi$ (3.1416) radians, therefore 0.03$\backslash pi$ divided by the turn rate of the unit equals the time it takes to turn 180°.

Turn rate is defined as

t = \frac{0.03\pi}{T}

With t being the time it takes to turn around and T the turn rate sources.

Turn rate slow directly affects the base turn rate, and all sources of turn rate slow stack multiplicatively.

With TSet being the Set Turn Rate Value, Tb the Base Turn Rate, r the Turn Rate Slow Value and a the Turn Rate Improve Value.

A unit does not immediately start turning at the highest rate it can turn. The turn rate ramps as the unit starts turning, reaching the unit's max turn rate after a certain amount of time. The rate at which the turn rate ramps up is unknown.

If a unit starts turning due to an ability or item cast order (by targeting a point, area or unit which is not within the required 11.5° facing angle), the turning cannot be canceled by a move, attack or a new spell cast order. Because the 11.5° angle can be in either direction, this creates a 23° angle directly in front of the hero allowing instant actions on any target within 23°. For any target beyond this angle, the hero must wait until they turn before the action occurs. The above formula is used to find the maximum time, so the time until the action takes place is actually ≤ 168.5°.

Any command ordered while turning due to a spell cast order gets queued up and executed once the spell is cast. In order to cancel the spell or ability cast, the player must issue a stop or halt command, in the same way how to cancel spell during its cast animation. This is to prevent accidental canceling of casts due to fast clicking. Issuing a stop or halt command (with S) does not stop the unit from turning if it has already started to turn, but stops the order which initiated the turning. For example, this allows Templar Assassin to turn during Meld without canceling the ability, as long as the move command is stopped before the targeted point is within the required angle.

T = \times (1 - 0.7) = Expression error: Unexpected * operator.

t = \frac{ 0.03\pi }{ Expression error: Unexpected * operator. } = Expression error: Unexpected < operator.

T = \times (1 - 0.7) \times (1 - 0.5) = Expression error: Unexpected * operator.

t = \frac{ 0.03\pi }{ Expression error: Unexpected * operator. } = Expression error: Unexpected < operator.

Modifying Turn Rate[]

Several abilities and items have abilities that slows or improve turn rate. For better readability, some of the turn rates in Hero pages are given as degrees per second, instead of radians per 0.03 seconds.

Ahli: Turn Over Adalah Keluar dari Pekerjaan

Berikut pendapat para ahli yang menjelaskan apa itu turn over:

Turnover adalah keinginan karyawan untuk berhenti kerja dari perusahaan secara sukarela atau pindah kerja dari satu tempat ke tempat lain berdasarkan pilihannya sendiri.

Jewell dan Siegall mendefinisikan employee turnover sebagai fungsi dari ketertarikan individu yang kuat terhadap berbagai alternatif pekerjaan lain di luar organisasi atau sebagai penarikan diri dari pekerjaan sekarang yang tidak memuaskan.

Turnover adalah kecenderungan atau niat karyawan untuk berhenti bekerja dari pekerjaannya secara sukarela atau pindah dari satu tempat kerja ke tempat kerja lain menurut pilihannya sendiri.

Menurut Simamora , turnover adalah pemisahan diri secara sukarela oleh seorang karyawan dari organisasi.

Turnover merupakan kecenderungan atau intensitas individu untuk meninggalkan organisasi karena berbagai alasan, termasuk keinginan untuk memperoleh pekerjaan yang lebih baik.

Modifying Turn Rate[edit]

Several abilities and items have abilities that slows or improve turn rate. For better readability, some of the turn rates in Hero pages are given as degrees per second, instead of radians per 0.03 seconds.

Angle of bank formula

The formula for calculating the angle of bank for a specific true airspeed (TAS) in SI units (or other coherent system) is:[3]

ϕ = arctan ⁡ v t 2 r g {\displaystyle \phi =\arctan {\frac {v_{\mathrm {t} }^{2}}{rg}}}

where ϕ {\displaystyle \phi } is the angle of bank, v t {\displaystyle v_{\mathrm {t} }} is true airspeed, r {\displaystyle r} is the radius of the turn, and g {\displaystyle g} is the acceleration due to gravity.

For a rate-one turn and velocity in knots (nautical miles per hour, symbol kn), this comes to

ϕ = arctan ⁡ v t [ k n ] 364 {\displaystyle \phi =\arctan {\frac {v_{\mathrm {t} }[\mathrm {kn} ]}{364}}} .

A convenient approximation for the bank angle in degrees is

ϕ / ∘ ≈ v t [ k n ] 10 + 7 {\displaystyle \phi /^{\circ }\approx {\frac {v_{\mathrm {t} }[\mathrm {kn} ]}{10}}+7}

For aircraft holding purposes, the International Civil Aviation Organization (ICAO) mandates that all turns should be made, "at a bank angle of 25° or at a rate of 3° per second, whichever requires the lesser bank."[4] By the above formula, a rate-one turn at a TAS greater than 180 knots would require a bank angle of more than 25°. Therefore, faster aircraft just use 25° for their turns.

Turn Rate Setting Abilities[edit]

Set Turn Rate ( $T\_\{Set\}$ ) sets a unit's turn rate to a fixed value for the duration, so it cannot be altered by other effects.

The following abilities sets turn rate to the given value for the duration.

Turn Rate Setting Abilities

Turn Rate: 0.039Duration: 6Sets Clockwerk's turn rate while the ability is active.

Turn Rate: 0.002Max Aim Time: 350Sets Hoodwink's turn rate while the ability is active.

Turn Rate: Expression error: Unexpected * operator.Ray Duration: Sets Phoenix's turn rate while the ability is active.

Turn Rate: Expression error: Unrecognized punctuation character "%".Roll Duration on Attack: 275°Roll Up Duration: 2.25Sets Pangolier's turn rate while the ability is active. Pangolier does not roll during Roll Up, if an attack of a hero lands on him, he rolls for 275° seconds.

Dysfunctional Turnover

Dysfunctional Turnover terjadi ketika karyawan yang berkinerja baik mengundurkan diri dari perusahaan. Dikatakan dysfunctional karena hal tersebut dapat mengganggu produktivitas perusahaan.

Kita tahu semua bahwa setiap perusahaan memiliki standarnya sendiri. Namun, ada sebuah value bagi banyak perusahaan: meminimalisir angka karyawan yang resign.

Ketika angka resign karyawan tinggi, perusahaan akan merasakan dampak negatif. Mulai dari produktivitas yang menurun, biaya pelatihan baru yang meningkat, hingga semangat kerja tim berkurang.

Karena itulah, umumnya, perusahaan harus memiliki sejumlah syarat turnover karyawan. Lantas, apa yang harus diperhatikan perusahaan dalam mengelola turnover karyawan? Kurang lebih, inilah syarat turn over:

Ingatlah, setiap karyawan yang bertahan adalah aset berharga yang memastikan kelangsungan bisnis Anda. Jadikan mereka sebagai prioritas, dan Anda akan merasakan dampak positifnya bagi perusahaan.

Turn Rate Slowing Abilities[]

The following abilities slows turn rate:

Turn Rate Slowing Abilities